A strong, long lasting solvent-free adhesive which is water resistant and can be painted or sanded. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).

Ask about the product

Tax rate

22 %

Price with VAT:

36,50 €

ADD TO CART

ARALDITE RAPID

USE

Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tape) around 20 minutes. Allow 3 hours to attain full strength before rough handling or sanding.

How to apply
Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30°C to 65°C). Oil, chemical and impact resistant. Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.

Storage
Should be stored in a dry place at room temperature in the original syringe.

Environmentally friendly product formulation plus eco-friendly packaging for easy recycling.

WARNING

H315 Causes skin irritation.

H319 Causes serious eye irritation.

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

H412 Harmful to aquatic organisms, with long-lasting effects.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read the label before use.

P261 Do not breathe dust/fume/gas/mist/vapors/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.