ARALDITE SV/HV 427 Repair epoxy paste 500 + 500 g
ARALDITE SV/HV
Key properties
• Cold setting, low density formulation
• Consistent machining characteristics
• Combines the stability of Araldite resins with the machinability of wood
• Bonds with most structural materials
• Can be worked with patternmakers tools
Applications
• Construction models and patterns
• Alteration or repair of existing tools and patterns (resin, wood, or metal)
Mixing
Weigh out resin and hardener. Using a spatula (or similar blade) on a clean dry non absorbent surface, mix
thoroughly until the mixture is a uniform brown color. Mix together equal proportions of SV 427-2 and HV 427-1 on flat surface, using a suitable blade.
A can of 500 grams of mixture is usable for 50 – 60 minutes
Application
The mixture may be built up layer by layer to any thickness. Each layer should be allowed to gel before
application of the succeeding layer as a precaution against possible build up excessive exothermal heat.
DANGEROUS
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P261 Do not breathe dust/fume/gas/mist/vapors/spray.
P273 Prevent release into the environment.
P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.
