A two-component elastic mold making material used for casting wax, gypsum, urethanes, epoxy , polyesther, concrete...
- finest details reproduction
- flexible and high tear-strength
-high temperature and chemical resistance , max. temperature 120°C
Weigh the appropriate amounts of components A and B, mix thoroughly, pour into a different container, mix again and pour. Shake well before pouring (air bubbles).
Hardness 60-65 Shore A
Mixing ratio A:B 100 : 60 by weight
Density at 23˚C 1,10 ± 0,1 g/cm3
Tensile strength > 350 N/cm2
Curing time 2 hours, final hardness after 24 hours
Pot life at 20˚C 10 minutes
Elongation at break > 120 %